PVC gloves Production Line
Introduction of Fengwang PVC glove production line's processes
Fengwang PVC glove production line is mainly consist of 4 parts:
1.Compounding equipments: including mixing machine, filter, vacuum
di-bubble machine, latex conveying pump;
2.Dipping equipments: frame, chain, dipping tank, recycling device,
3.Plasticizing oven: Cooling, beading, Powder spreading, stripping;
4.Powder removing: Cooling sets, beading sets, powdering sets,
stripping sets, powder removing.
First of all, for making PVC glove, Putting the main material and
agents into the specific container and mixing them by certain
ratio. The mixture will be sent to the dipping tank by the feeding
pump after filter, vacuum machine, storage. Normally, hand mould
will enter the dipping tank automatically. PVC Gloves making machine will rotating after dipping to even the latex sticking on the hand
mould and let the extra latex dripping from the hand mould.
Extra latex will return to the dipping tank by passing the
collecting tank. The temperature of oven will be at 230~250 degree.
Under this condition, the latex will start shaping. The
self-cooling, beading, powdering stages is coming after oven. The
manual stripping stage will take the glove out from the hand mould.
The product will be stored after powdering.
Dipping: Hand mould is dipping in the latex.
Beading；Applying adequate angle, the bead will appears at end of
Stripping: Manually take the glove from the hand mould.
Packing: packing after physical and appearance check.
Household/Medical glove(full dipping) production line
This PVC Gloves making machine production line is applying the method of continuous production and direct-dipping
method. The quality of the product is evenly and colour of it is
splendid. Different sorts of products can be make at the same line
simultaneously. Length of the line can be 60, 80, 100 meter. The
PVC Gloves machine Production Line is highly automatic and the capacity is also high. There is an
option for customer for automatic stripping. The length of the line
is also adjustable according to the customer conditions.
1.PVC Gloves machine is well designed. It can be modified reasonable according to the
shaping processes of different material( latex, nitrile, PVC,PC).
Automatic refill system makes the quality stable and
even-distribution. Also the advantages including: heat receiving is
even, production rate is high, easy-stripping.
2.Heat recycling is the principle of the oven let the temperature
inside the oven even. The insulation is well by good heat
insulation material. In order to raise the heat efficiency, the
auto-temperature control system alone with the control switch can
guarantee the good product rate.
3.Special flexible piston-style connect device makes the soild
connection and easy-changing of the hand mould.
PVC glove production line Advantages:
1, Safety, to avoid the gear and chain exposed in outside
2, To reduce the oil leaking
3, More convenient to adjust the rubber roller
4, Low energy consumption after put into use; the box type design
greatly reduces the maintenance rate
More information please view here!
More Products Please View Hifactory.